DLC Series Thermostat

Single Set-Point, User Friendly Control

The DLC Series Thermostat by Process Technology ensures precise digital control for consistent outcomes in plating and etch processes across various aqueous environments. It features a large .56” LED display for easy viewing, along with a robust 10-foot (3m) Fluoropolymer (FEP) encased, 1000-ohm thermistor sensor. This thermostat offers vapor-tight protection with an IP21 front panel and a sturdy plastic enclosure equipped with sealed tactile switches. It operates on a single pole, double throw switch capable of handling 16 amps at 120 or 240 volts, single phase. With an adjustable temperature range from -58°F (-50°C) to 302°F (150°C), it’s designed for both precision and durability.

Product Manual
Data Sheet
Process Technology DLC Series Thermostat

Features & Benefits of DLC Series Thermostat

  • Large, .50” high LED display for easy readability.

  • Precise control for consistent plating and etch rates in most aqueous processes.

  • Fluoropolymer (FEP) covered 10-foot (3m) thermistor standard, for extended service in corrosive liquids; extendable with copper wire.

  • Vapor-tight, IP64 front panel protection on a plastic enclosure with sealed tactile switches for standalone operation.

  • Single pole, double throw switch rated at 16 amps for 120 or 240 volts, with a 12 amp max when operating heaters with thermal protectors.

  • Ambient temperature range from 14°F (-10°C) to 158°F (70°C).

  • ±1% full span accuracy for single digit precision.

  • Single phase only.

DLC Series Thermostat

Model NumberVoltsMax. AmpsTemp. RangeSensor Length (Ft/m)Repl. Sensor P/NShip Wgt. (Lbs./kg)
T-DLC16-112016-58 to 302°F (-50 to 150°C)10′ (3m)DLC-10L3 (1.4)
T-DLC16-224016-58 to 302°F (-50 to 150°C)10′ (3m)DLC-10L3 (1.4)

*12 amp full load max if operating a heater with a thermal protector

Specifications

Category Details
Temperature Range Adjustable temperature range from -40°F (-40°C) to 999°F (538°C)
Options
  • Scalable voltage and current inputs
  • Three wire 100-ohm RTD sensors
  • Special sensors required for temperatures above 500°F (260°C)
  • 25-foot (7.6m) and 50-foot (15.2m) sensors
  • P2, P3, or P8 thermal protection systems
  • Integrated liquid level control components
  • Front panel mounted digital timers
  • Ground fault protection of equipment (GFPE) circuitry
  • Combination controls available for three phase service and larger heater loads
  • NEMA 4/4X enclosure (with internal heater for outdoor use)
Safety Features
  • Pre-wired P1 terminal blocks
  • Non-volatile memory
  • Programmable high alarm shutdown
  • Sensor short and break protection
  • Security code restricted menu
  • Programmable high set point limit
Certifications cULus